40%
25.03.2020
, according to the README file, requires "half the memory, all in a binary less than 40MB" to run. By design, it is authored with a healthy degree of foresight by the people at Rancher [3]. The GitHub page [4 ... The k3s lightweight and secure Kubernetes distribution can handle both unattended workloads in remote locations with minimal resources and clusters of IoT appliances. ... Kubernetes k3s lightweight distro
40%
14.08.2020
offline Completed without error 00% 12441 -
# 3 Short offline Completed without error 00% 12441 -
The output of the extended test is reported in the Extended offline
line. It, too, was completed
40%
14.08.2017
:31 FS_scan.csv
$ gzip -9 FS_scan.csv
$ ls -lsah FS_scan.csv.gz
268K -rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip with the -9
40%
05.11.2018
nodes, and make sure to do this as a user and not as root.
3. To make life easier, use shared storage between the controller and the compute nodes.
4. Make sure the UIDs and GIDs are consistent
40%
13.12.2018
In previous articles, I examined some fundamental tools for HPC systems, including pdsh [1] (parallel shells), Lmod environment modules [2], and shared storage with NFS and SSHFS [3]. One remaining
40%
17.02.2015
Xino-Lime
Linux
All-winner A10 processor
Single ARM Cortex-A8 @1GHz
Mali-400
512MB DDR3
SATA connector, 2 USB, Fast Ethernet, USB OTG, HDMI
1.9W
$44/EUR 30
40%
29.09.2020
Completed without error 00% 12441 -
# 2 Short offline Completed without error 00% 12441 -
# 3 Short offline Completed without error 00% 12441
40%
14.06.2017
-rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip
with the -9
option (i.e., maximum compression), the resulting file is 268KB. The .gz
40%
03.07.2013
. The speed-up increases from 1.00 with 1 process to 4.71 with 64 processes. However, also notice that the wall clock time for the serial portion of the application does not change. It stays at 200 seconds
40%
14.11.2013
applies to the operation of an instance of the CDB and not for the PDBs.
Some simple math can help clarify this concept: For example, 10 databases in version 11g need at least 10x350MB, or around 3.5GB
