18%
30.11.2025
# stmfadm create-tg myfcserver
19 # stmfadm add-tg-member -g myfcserver wwn.10000000c93805a6
20 # stmfadm create-hg myfcclient
21 # stmfadm add-hg-member -g myfcclient wwn.50060b0000c26204
22 # svcadm enable
18%
09.12.2025
implementation. The Remora CPU utilization chart shows a single CPU thread consistently at 100%, without the frequent core switching observed previously.
Performance improved dramatically: The single-core CPU
18%
30.11.2025
.0
2.2.x.
2.6.30 through 2.6.35
Debian 6 (Squeeze)
2.3.x.
2.6.36 through 3.0
Ubuntu 11.10
2.4.x.
3.1.
openSUSE 12.1
2.5.x.
3
18%
30.11.2025
.g., 100
for VLAN 100). Type a 1
as the tunnel assignment ID to define a tunnel session ID. You need to configure the same settings for restricted network access; that is, you specify the VLAN
18%
30.11.2025
.g., 192.168.0.0/24).
# tcpdump net 192.168.1.1/24
Src, dst
Only capture packets from a source or destination.
# tcpdump src 192.168.100.234# tcpdump dst 10.10.24.56
host
18%
30.11.2025
January 2012 through March 2012. According to the report, 6 million new malware samples were created in the first quarter of 2012.
The announcement states that "Trojans set a new record as the preferred
18%
30.11.2025
an official Linux kernel component in kernel version 2.6.20.
KVM Inside
As a kind of worst-case fallback, KVM can provide a slow but functional emulator for privileged functions, but it provides genuine
18%
30.11.2025
, some parts of which are standardized and some of which are defined by the device manufacturer.
In production, the Standard MIB II ranges (1.3.6.1.2.1.*) and the vendor-specific area below
18%
30.11.2025
. The target systems only require the systemtap-runtime RPM and the staprun program it contains. The following command creates a prebuilt binary kernel module for the target system:
stap -r kernel-PAE-2.6.31.12-174.2.22
18%
30.11.2025
-devel, or something similar. After the build, you should check the installation and launch the software for the first time. To do so, you can load the kernel module manually:
modprobe datapath/linux-2.6/openvswitch
