20%
30.11.2025
686
oprofile-0.9.5-4.fc12.i686
To profile the kernel, you need to tell OProfile where the kernel image is located with the --vmlinux option:
opcontrol --setup --vmlinux=/usr/lib/debug/lib/ modules
20%
30.11.2025
192.168.2.0/24;
21 service any;
22 }
23 IPsec-policy pfs2-aes256-sha1;
24 }
25 }
26 }
27 }
Again you can reuse the proposal and the policy. Assuming
20%
30.11.2025
cgroup, which has no restrictions. You can test this by sending a SIGUSR1 to the process:
# kill -USR1 $pid
578804+0 records in
578804+0 records out
296347648 bytes (296 MB) copied, 7.00803 s, 42.3 MB
20%
30.11.2025
# If the line already exists ....
13 if [ $back -eq 0 ];
14 then
15 echo "############### Line already exists! #############"
16 grep $keyfield $newdat
17 echo
20%
30.11.2025
irrespective of actual system capacity, because the memory is only being allocated, not used. It will then run into the limits of process address space, hitting a wall at 3056MB of allocation; the maximum
20%
30.11.2025
will be accepted through April 10, 2011. Look for more on the Contegix website http://www.contegix.com/.
Icinga v1.3.0 Released with Dual-Stack Support
By now
20%
30.11.2025
(number, label):
07 for i in xrange(number):
08 print ' ' + str(i) + ' ' + label
09 sleep((number - 15)/10.0)
10
11 if '__main__' == __name__:
12
13 p1 = Process(target = count, args = (20
20%
30.11.2025
-On
The current v1.5 of Proxmox VE from May 2010 [1] is based on the Debian 5.0 (Lenny) 64-bit version. The Proxmox VE kernel is a standard 64-bit kernel with Debian patches, OpenVZ patches for Debian, and KVM
20%
30.11.2025
these servers send more information out to the Internet than they receive (like a typical web server).
I'm going to assume that, in this case, the Internet-facing network interface is eth0. In other words, when
20%
30.11.2025
than 0 (Figure 3). If not, either the processor doesn't support the special commands, or the commands have been disabled in the computer's BIOS. Users with Intel processors can additionally check
