29%
19.02.2013
interface eth3
09 ip ospf message-digest-key 1 md5 hallo123
10 !
11 !
12 router ospf
13 redistribute connected
14 network 172.16.1.0/24 area 0.0.0.0
15 network 172.17.0.0/
16 area 0.0.0.016 network 192,168.1.0
29%
07.11.2023
.82 TiB
Allocatable NO
PE Size 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID pHZ105-nDrN-V1E2-nGvI-1wyc-dqLC-TlXB58
29%
14.09.2021
$(find /sys/devices/system/cpu -regex ".*cpu[0-9]+/topology/thread_siblings_list") | sort -n | uniq
0,32
1,33
2,34
3,35
4,36
5,37
6,38
7,39
8,40
9,41
10,42
11,43
12,44
13,45
14,46
15,47
16,48
17,49
18,50
19,51
20,52
21,53
22,54
23,55
24,56
25
29%
03.02.2022
command, except it lists all of the cores at once.
Listing 4
Real or SMT? Method 2
$ cat $(find /sys/devices/system/cpu -regex ".*cpu[0-9]+/topology/thread_siblings_list") | sort -n | uniq
0
29%
18.03.2020
.825889E-02
12 0.733083 0.734229 0.726876E-02
13 0.735336 0.736293 0.641230E-02
14 0.737221 0.738029 0.574042E-02
15 0.738814 0.739502 0
29%
30.11.2020
):
11
12 s = 0.0
13 s += h * f(a)
14 for i in range(1, n):
15 s += 2.0 * h * f(a + i*h)
16 # end for
17 s += h * f(b)
18 return (s/2.)
19 # end def
20
21
22 # Main section
23 comm = MPI
29%
20.06.2012
was there. To test whether this worked, ssh
to the node n0001
as root.
[root@test1 ~]# ssh n0001
Last login: Sat May 26 12:00:06 2012 from 10.1.0.250
The /etc/hosts
on the master node works fine
29%
21.08.2012
just two nodes: test1, which is the master node, and n0001, which is the first compute node):
[laytonjb@test1 ~]$ pdsh -w test1,n0001 uptime
test1: 18:57:17 up 2:40, 5 users, load average: 0.00, 0
29%
02.06.2020
about the -i and -n switches you can use with bandwhich. If you want to monitor the eth0 network interface instead of a WiFi interface, then use the -i switch. If you want to turn off DNS resolution
29%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
