29%
03.02.2022
command, except it lists all of the cores at once.
Listing 4
Real or SMT? Method 2
$ cat $(find /sys/devices/system/cpu -regex ".*cpu[0-9]+/topology/thread_siblings_list") | sort -n | uniq
0
29%
18.03.2020
.825889E-02
12 0.733083 0.734229 0.726876E-02
13 0.735336 0.736293 0.641230E-02
14 0.737221 0.738029 0.574042E-02
15 0.738814 0.739502 0
29%
02.08.2022
.05
FT (4 cores)
1.69
17.26
67.7
IS (4 cores)
0.6
2.16
8.2
LU (6 cores)
5.13
41.8
MG (4 cores)
1.2
3.8
39
29%
30.11.2020
):
11
12 s = 0.0
13 s += h * f(a)
14 for i in range(1, n):
15 s += 2.0 * h * f(a + i*h)
16 # end for
17 s += h * f(b)
18 return (s/2.)
19 # end def
20
21
22 # Main section
23 comm = MPI
29%
20.06.2012
was there. To test whether this worked, ssh
to the node n0001
as root.
[root@test1 ~]# ssh n0001
Last login: Sat May 26 12:00:06 2012 from 10.1.0.250
The /etc/hosts
on the master node works fine
29%
21.08.2012
just two nodes: test1, which is the master node, and n0001, which is the first compute node):
[laytonjb@test1 ~]$ pdsh -w test1,n0001 uptime
test1: 18:57:17 up 2:40, 5 users, load average: 0.00, 0
29%
02.06.2020
about the -i and -n switches you can use with bandwhich. If you want to monitor the eth0 network interface instead of a WiFi interface, then use the -i switch. If you want to turn off DNS resolution
29%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
29%
30.01.2024
Dell Precision Workstation T7910
Power
1,300W
CPU
2x Intel Xeon Gold E5-2699 V4, 22 cores, 2.4GHz, 55MB of cache, LGA 2011-3
GPU, NPU
n/a*
Memory
29%
07.10.2014
Amount of virtual memory used by the process
1405m
1,405MB
RES
Amount of physical memory used by the process
1.0g
1.0GB
SHR
Shared memory used
