32%
31.10.2025
virtualization of domain controllers. And, making snapshots of domain controllers is no longer a problem either (see the article on Hyper-V 3.0 in this issue). VMware and other virtualization vendors likely
32%
30.11.2025
addr = 10.42.0.101:6789
14 [mon.b]
15 host = bob
16 mon addr = 10.42.0.102:6789
17 [mon.c]
18 host = charlie
19 mon addr = 10.42.0.103:6789
20 [osd.0]
21 host = alice
22 [osd.1]
23 host
32%
30.11.2025
appliance (see the "Test Hardware" box) with eight fast disks in a RAID level 0 array with a stripe size of 64KB. The RAID is divided into an SSD array and an HDD array with identical partitions on both
32%
30.11.2025
. All told, these measures reduce the energy requirements per gigabyte of RAM from just under 7 watts for ECC DDR2 FB-DIMMs to a current figure of 0.54 watts for ECC DDR3 Registered DIMMs (Table 2
32%
30.11.2025
a DNS server, it uses three standard addresses as its name servers: fec0::1, fec0::2 and fec0::3. The prefix fec0 was originally the counterpart to the RFC 1918 addresses but has been deprecated. If you
32%
30.11.2025
of the commercial UCS variants for software makers and integrators.
UVMM
The current "Free for Personal Use" ISO of UCS 2.4 [4], ucs_2.4-0-100829-dvd-amd64.iso, isn't quite up to date. The Univention Virtual
32%
26.03.2025
.
The platform also comes with secure email communication that supports OAuth 2.0 for POP3 and IMAP email protocols to enable modern and secure authentication for the retrieval of email from services
32%
30.11.2025
went to press. I installed Prelude on Debian Squeeze (6.0) and Ubuntu 11.10 for this article.
Seeing Past False Positives
SIEM systems are, without a doubt, an important component of any modern
32%
30.11.2025
how to set some of the parameters for the standard Ethernet interface (IP address 10.10.1.20, subnet mask 255.255.255.0, default gateway 10.10.1.1, DNS server 10.10.1.254).
To discover the name
32%
30.11.2025
runs the mknod /dev/hello c 254 0 command, execution stops, and you can inspect the variables. To continue program execution, enter the continue command. To isolate the debugger from the Linux system
