19%
09.01.2013
).
Smartmontools is compatible with all S.M.A.R.T. features and supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. It also supports the major Linux RAID cards, which can sometimes cause ... Modern drives use S.M.A.R.T. (self-monitoring, analysis, and reporting technology) to gather information and run self-tests. Smartmontools is a Linux tool for interacting with the S.M.A.R.T. features ... S.M.A.R.T., smartmontools, and drive monitoring
19%
03.02.2022
] device to store /var/log, offloading the primary source of boot-time writes from the physical device to a 50MB RAM drive.
Figure 3: Three zram partitions
19%
21.08.2012
transaction check
---> Package fontconfig.i686 0:2.8.0-3.el6 will be installed
---> Package freetype.i686 0:2.3.11-6.el6_2.9 will be installed
---> Package gamin.i686 0:0.1.10-9.el6 will be installed
19%
20.10.2013
Modern drives use S.M.A.R.T. (self-monitoring, analysis, and reporting technology) to gather information and run self-tests. Smartmontools is a Linux tool for interacting with the S.M.A ... of the drives (more on that later).
Smartmontools is compatible with all S.M.A.R.T. features and supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. It also supports the major Linux RAID cards ...
Modern drives use S.M.A.R.T. (self-monitoring, analysis, and reporting technology) to gather information and run self-tests. Smartmontools is a Linux tool for interacting with the S.M.A ... S.M.A.R.T., Smartmontools, and Drive Monitoring
19%
30.01.2020
Id: 4e90b424-95d9-4453-a2f4-8f5259f5f263 Duration: 70.72 ms Billed Duration: 100 ms Memory Size: 128 MB Max Memory Used: 55 MB Init Duration: 129.20 ms
More or Less
19%
08.05.2019
; ia[i] = i;
test(a,b,c, SIZE);
for (i=0; in", a[i], b[i], c[i]);
}
Listing 9: nowait Output
0
19%
28.03.2012
--------><----------Disks-----------><----------Network---------->
#cpu sys inter ctxsw KBRead Reads KBWrit Writes KBIn PktIn KBOut PktOut
3 1 1421 2168 0 0 41000 90 0 2 0 0
3 2 1509 2198 64 2 49712
19%
14.11.2013
in Figure 3, you could select the IP addresses 192.168.100.100 through 192.168.100.200. You need to enter this range below Public IP range/list
using a hyphen as the separator character; in the example
19%
30.11.2025
_seq=3 ttl=52 time=103 ms
Personally, I prefer using tunnels over Teredo and 6to4 for several reasons – the simplest is that it works with a public IP or behind a NAT box (well, usually). Tunnels ... 3
19%
17.01.2023
lines I changed the name of the compute node to match my node (n0001
).
Listing 3: Edit the Template File
$ sudo perl -pi -e "s/ControlMachine
