20%
14.06.2017
-rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip
with the -9
option (i.e., maximum compression), the resulting file is 268KB. The .gz
20%
30.11.2025
(6192 bits), 774 bytes captured (6192 bits)
Ethernet II, Src: 00:1a:2b:3c:4d:5e, Dst: 00:6f:7g:8h:9i:0j
Internet Protocol Version 4, Src: 192.168.1.101, Dst: 192.168.1.104
User Datagram Protocol, Src Port
20%
23.03.2016
7
):
$ ls -s /sys/devices/system/edac/mc/mc0
total 0
0 ce_count 0 csrow1 0 csrow4 0 csrow7 0 reset_counters 0 size_mb
0 ce_noinfo_count 0 csrow2 0 csrow5 0 device 0 sdram
20%
24.02.2022
.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000 (Ethernet)
RX packets 11919 bytes 61663030 (58.8 Mi
20%
17.01.2023
to NTP server (162.159.200.123) at stratum 4
time correct to within 21 ms
polling server every 64 s
Your output will not match this exactly, but you can see that it’s using an outside source to synchronize
20%
04.12.2024
Shift or – as shown here – an Ingress route for accessing the AWX service.
This strategy also works with MicroK8s or K3s. You might have to adjust the Ingress definition if routers such as Traefik cannot cope
20%
07.04.2022
,BROADCAST,RUNNING,MULTICAST> mtu 1460
inet 10.0.0.2 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000
20%
25.03.2020
7 1 56008 loop1
06 7 2 56184 loop2
07 7 3 91264 loop3
08 259 0 244198584 nvme0n1
09 8 0 488386584 sda
10 8 1 1024 sda1
11
20%
14.08.2017
:31 FS_scan.csv
$ gzip -9 FS_scan.csv
$ ls -lsah FS_scan.csv.gz
268K -rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip with the -9
20%
11.04.2016
are generating a test installation only.
While the installation process is running, the Ubuntu host needs additional resources. Even though only 3GB of RAM and two processor cores are required, the installation
