20%
    
    
    10.06.2015
        
    
    	
         (xrandr) "provides automatic discovery of modes (resolutions, refresh rates, …) [and] the ability to configure output dynamically (resize, rotate, move, …)" [3]. The xrandr configuration tool lets me
    
 
		    
				        
    20%
    
    
    10.07.2017
        
    
    	
         with the original Raspberry Pi Model A, ranging from two to more than 250 nodes. That early 32-bit system had a single core running at 700MHz with 256MB of memory. You can build a cluster of five RPi3 nodes with 20
    
 
		    
				        
    20%
    
    
    29.09.2020
        
    
    	
         version 3.0 onward, Helm had some relatively significant changes with the removal of Tiller because of security concerns [6], so be sure to choose version 3.0+.
Hoots Mon
The Helm Project itself provides
    
 
		    
				        
    20%
    
    
    17.05.2017
        
    
    	
        , 5 ) / ( 8, 5 ) }
      DATA {
      (0,0): 0, 1, 2, 3, 4,
      (1,0): 5, 6, 7, 8, 9,
      (2,0): 10, 11, 12, 13, 14,
      (3,0): 15, 16, 17, 18, 19,
      (4,0): 20, 21, 22, 23, 24,
      (5,0): 25, 26, 27, 28, 29,
      (6
    
 
		    
				        
    20%
    
    
    07.04.2022
        
    
    	
        ,BROADCAST,RUNNING,MULTICAST>  mtu 1460
        inet 10.0.0.2  netmask 255.255.255.255  broadcast 0.0.0.0
        inet6 fe80::bfd3:1a4b:f76b:872a  prefixlen 64  scopeid 0x20
        ether 42:01:0a:80:00:02  txqueuelen 1000
    
 
		    
				        
    20%
    
    
    24.02.2022
        
    
    	
        .255.255.255  broadcast 0.0.0.0
        inet6 fe80::bfd3:1a4b:f76b:872a  prefixlen 64  scopeid 0x20
        ether 42:01:0a:80:00:02  txqueuelen 1000  (Ethernet)
        RX packets 11919  bytes 61663030 (58.8 Mi
    
 
		    
				    
    20%
    
    
    20.08.2012
        
    
    	 
         examplehost.tld 22
If firewalling is in place and you need to originate your connection from a specific IP address to open a port, entering
# nc -s 1.2.3.4 examplehost.tld 8181
will connect to examplhost
    
 
		    
				        
    20%
    
    
    31.10.2025
        
    
    	
         seconds, for example:
# nc -p 16000 -w 30 examplehost.tld 22
If firewalling is in place and you need to originate your connection from a specific IP address to open a port, then you can enter:
# nc -s 1.2.3
    
 
		    
				        
    20%
    
    
    09.09.2024
        
    
    	
         images
REPOSITORY          TAG       IMAGE ID       CREATED          SIZE
ubuntu-24.04-dev2   latest    8f311b6fbb1e   9 seconds ago    1.82GB
ubuntu-24.04-dev1   latest    2358ab17d70c   35 minutes ago   149MB
    
 
		    
				        
    20%
    
    
    25.03.2020
        
    
    	
        ] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdd1[5] sde1[4] sdc1[2] sdb1[1] nvme0n1p1[0](J)
      20508171264 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [UU