29%
30.11.2025
Manager (CLVM) is used to mount the shared storage.
Architecture
The two physical cluster nodes in this article each have four network cards: eth0
through eth3
. The first (eth0
), and third (eth2 ... 0
29%
09.12.2021
-e package-list.txt
Enter passphrase:
Re-enter passphrase:
Output filename is: package-list.txt.lrz
package-list.txt - Compression Ratio: 2.537. Average Compression Speed: 0.000MB/s.
Total time: 00:00:05.11
Listing 11
29%
17.03.2021
” on a single special motherboard. Each node was a Transmeta Efficeon processor connected to the other nodes over Gigabit Ethernet (GigE). Each node also had 512MB of memory, and the system had a 160GB hard drive
29%
20.06.2022
://get.k3s.io | sh -s - server --datastore-endpoint="mysql://rancher:secret@tcp(10.42.0.1:3306)/rancher"
Of course, the command specified here will only work if the system has direct access to the Internet
29%
30.01.2020
.
Cumulus Linux 4.0 has added a few new supported platforms, such as Edgecore Minipack AS8000 (100G Tomahawk 3), Mellanox SN3700C (100G Spectrum-2), Mellanox SN3700 (200G Spectrum-2), and HPE SN2345M (100G
29%
03.02.2022
=https://docs.python.org/3/library/http.server.html
[Service]
Type=simple
WorkingDirectory=/home/jcb/Python/sectest
ExecStart=/usr/bin/python3 -m http.server 8080
ExecStop=/bin/kill -9 $MAINPID
[Install]
Wanted
29%
15.06.2016
client and server TCP stacks. In this article, I've broken the list of tuning options into three groups: (1) NFS performance tuning options, (2) system tuning options, and (3) NFS management/policy options
29%
27.09.2021
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
64 bytes from 52.90.56.122: icmp_seq=3 ttl=48
time=40.492 ms
[ output truncated ]
Welcome to Ubuntu 20.04.1 LTS
29%
10.11.2021
package-list.txt
Output filename is: package-list.txt.lrz
package-list.txt - Compression Ratio: 2.604. Average Compression Speed: 0.000MB/s.
Total time: 00:00:00.04
By default, lrzip
does not overwrite the original file
29%
04.11.2011
command [3], you can use GNU parallel as a drop-in replacement and start executing many things at once right away.
Surprisingly, the parallel
command was not packaged for Fedora 13 or the Fedora Rawhide
