20%
05.12.2016
. The holdingdisk section (lines 22 to 26) specifies the key data for such a holding disk. In Listing 1, Amanda is allowed to cache data in the /amanda/holding directory, where it can use a maximum of 50MB space; any
20%
14.03.2018
rules:
48 - proto: udp
49 from_port: 12345
50 to_port: 12345
51 cidr_ip: 0.0.0.0/0
52 - proto: tcp
53 from_port: 22
54 to_port: 22
55 cidr_ip: 0.0.0.0/0
20%
11.02.2016
. The Koozali Foundation [3], from the US, has been responsible for the software, which was released under the GPL, since 2013. Weighing in at just 640MB for the 64-bit version and just under 600MB for the 32-bit
20%
18.06.2014
mtime age file in days: 0.016 days
Standard deviation mtime age in days: 590.7352 days
*** Mtime interval summary
[ 0- 1 days]: 176 ( 0.05%) ( 0.05% cumulative)
[ 1- 2 days]: 0 ( 0.00%) ( 0
19%
29.09.2020
(abridged)
$ docker build -t dockly .
Sending build context to Docker daemon 16.52MB
Step 1/9 : FROM node:8-alpine
8-alpine: Pulling from library/node
e6b0cf9c0882: Pull complete
93f9cf0467ca: Pull
19%
09.10.2017
wrote this article, it was still at alpha version (v. 6.0.0-alpha13), which supported Ubuntu 14.04/16.04, CentOS 7.1, and Mac OS X 10.11, as well as Windows versions. Since then, PowerShellCore v6.0.0
19%
26.04.2012
: In LR-DIMMs, all of the signal lines (including the data) run through an intermediate chip; this reduces the electrical load on the memory controller.
LR-DIMMs have an Isolation Memory Buffer (iMB
19%
10.04.2015
submitted his master's thesis on the subject of TCP Stealth in 2014 [12].
If you have been following the port knocking scenario for a few years, you might remember SilentKnock [13]. The project uses the same
19%
23.04.2014
on your system. Almost all firewalls allow port 22 access, so you don’t have to configure anything extra, such as NFS or CIFS. You just need one open port on the firewall – port 22. All the other ports can
19%
28.11.2023
"label": "localhost PING/PORT/HTTP Tests",
11 "tiles": [
12 {
13 "type": "PING",
14 "params": {
15 "hostname": "128.0.0.1"
16 }
17 },
18 {
19 "type": "PORT
