23%
13.10.2020
minutes (180 seconds) of wall clock time. Cautiously, but with lots of optimism, you run it on two cores. The wall clock time is just about two and a half minutes (144 seconds), which is 80% of the time
23%
02.02.2021
minutes (180 seconds) of wall clock time. Cautiously, but with lots of optimism, you run it on two cores. The wall clock time is just about two and a half minutes (144 seconds), which is 80 percent
23%
05.02.2019
-resizefs ran successfully
2018-10-09 20:43:00,261 - handlers.py[DEBUG]: finish: init-network/config-set_hostname: SUCCESS: config-set_hostname ran successfully
...
There is one thing worth mentioning here
22%
13.02.2017
as adminuser
with the password specified during the setup.
As an example, I'll look at the installation of opsi on a Debian 8.0 system. Keep in mind that the opsi server requires at least 16GB of space
22%
02.08.2022
is a matter of a few simple commands:
wget https://apt.puppet.com/puppet-tools-release-bullseye.deb
sudo dpkg -i puppet-tools-release-bullseye.deb
sudo apt-get update
sudo apt-get install puppet-bolt
To run
22%
30.11.2025
.network.type = veth
04 lxc.network.flags = up
05 lxc.network.link = br0
06 lxc.network.hwaddr = 08:00:12:34:56:78
07 #lxc.network.ipv4 = 0.0.0.0
08 lxc.network.ipv4 = 192.168.1.69
09 lxc.network.name = eth0
10 lxc
22%
25.03.2021
the desired host name directly after the GET request with a HOST specification (e.g., over Telnet on port 80, as in Listing 1).
Listing 1
Virtual Host Output
$ telnet www.wintermeyer.de 80
Trying
22%
24.09.2015
seconds) and 80% parallel (800 seconds), but with only one process. Amdahl’s Law says the speedup is 1.00.
As the number of processes increase, the wall clock time of the parallel portion decreases
22%
31.05.2012
Octave
R
JavaScript
v3f670da0
v2.7.1
vR2011a
v3.4
v2.14.2
v8 3.6.6.11
fib
1.97
31.47
1,336.37
2,383.80
22%
30.11.2025
, the MAC address (e.g., 00:11:22:33:44:55) is split down the middle, and two bytes containing FF:FE are inserted. This gives you 64 bits. If the basis is a globally unique address (which should be the case
