19%
23.03.2022
/loop4 11777 11777 0 100% /snap/core20/1328
/dev/loop5 18500 18500 0 100% /snap/gnome-3-34-1804/77
/dev/loop6 18500 18500 0 100% /snap/gnome-3
19%
05.09.2011
= kvmVM #specify the name
02 CPU = 1 # How many CPUs required?
03 MEMORY = 512 # RAM in MB
04 OS = [
05 KERNAL = "/boot/vmlinuz-2.6.32-24-generic", # Kernel to use
06
19%
16.10.2012
:Ethernet HWaddr 08:00:27:b0:21:7e
inet addr:192.168.1.85 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:feb0:217e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU
19%
14.06.2017
-rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip
with the -9
option (i.e., maximum compression), the resulting file is 268KB. The .gz
19%
12.05.2021
.xz 100%[=============================================================================================>] 1.77M 8.85MB/s in 0.2s
2021-03-21 15:40:30 (8.85 MB/s) - ‘perf-5.9.0.tar.xz’ saved [1857268
19%
21.01.2020
With the parted
utility, you can create a single partition on each entire HDD:
$ for i in sdb sdc sdd sde; do sudo parted --script /dev/$i mklabel gpt mkpart primary 1MB 100%; done
An updated list of drives
19%
25.03.2020
0 1048575 sr0
With the parted utility, you can create a single partition on each entire HDD:
$ for i in sdb sdc sdd sde; do sudo parted --script /dev/$i mklabel gpt mkpart primary 1MB 100
19%
02.08.2021
://github.com/brendangregg/FlameGraph.git
Cloning into 'FlameGraph'...
remote: Enumerating objects: 1067, done.
remote: Total 1067 (delta 0), reused 0 (delta 0), pack-reused 1067
Receiving objects: 100% (1067/1067), 1.87 MiB | 6.67 MiB/s, done
18%
05.02.2019
is to activate your application installation with the Apache enable site command. Also, you need to tweak your php.ini file to allow uploads larger than 6MB, which you'll need for SuiteCRM file uploads
18%
20.10.2013
a freshly installed CentOS 6.4 distribution on a newly built system with smartmontools installed using yum
. I also made sure the smartmontools daemon, smartd
, starts with the system by using chkconfig
