47%
05.09.2011
for AWS APIs; therefore, Eucalyptus clouds can scale out to Amazon EC2. Eucalyptus also implements an Amazon S3-compliant storage component called Walrus. Walrus is primarily a virtual machine repository
47%
14.11.2013
been available ever since in two flavors: a free open source version, which is completely under the GPLv3 license, and the commercial Eucalyptus Enterprise Edition, which supports the integration of SANs
47%
11.10.2016
network operating system in cooperation with Accton Technology Corporation, Arista, Broadcom, Intel, and VMware. The series of Altoline switches [3] by HP Enterprise (HPE), as the group is now called, were
47%
05.12.2016
), Kubernetes is written in Go and available under the Apache 2.0 license; the stable version when this issue was written was 1.3.
Figure 1: Kubernetes comes
47%
05.11.2018
nodes, and make sure to do this as a user and not as root.
3. To make life easier, use shared storage between the controller and the compute nodes.
4. Make sure the UIDs and GIDs are consistent
47%
13.12.2018
In previous articles, I examined some fundamental tools for HPC systems, including pdsh [1] (parallel shells), Lmod environment modules [2], and shared storage with NFS and SSHFS [3]. One remaining
47%
09.01.2013
://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 840 Series
Serial Number: S19HNSAD620517N
LU WWN Device Id: 5 002538 5a005092e
Firmware Version: DXT08B0Q
User Capacity: 120,034,123,776 bytes
47%
04.02.2013
3 and, in the current version 0.6.2, supports VNC and RDP – although with limited functionality in some cases. For example, you cannot transmit audio data or connect network drives over RDP
47%
19.11.2014
traffic over eth0, you can get an idea of network activity:
dstat -tn -N eth0 1 10
I added the time option (-t
) and the network stats option (-n
), then monitored the network device of interest (-N eth0
47%
21.08.2014
*
10 * daemon started successfully *
11 List of devices attached
12 015d8bed0d3c0814 device
If you use the commands from the SDK regularly, it makes sense to add its path, preferably like
