16%
06.08.2013
tool in IPRoute2 is ip.
In many cases, additional options can be set for the show commands. For example, if you only want to output the IP configuration for eth0
, the short command is
ip address
16%
14.03.2013
configuration work is necessary on Linux. You need to set up the Vesa driver explicitly in xorg.conf (Listing 1).
Listing 1
Vesa Configuration
01 Section "Device"
02 Identifier "device0"
03
16%
12.09.2013
Barracuda firewall series. The X201 version (right) has a wireless interface.
An optional accessory available for all Barracuda firewalls is a 3G USB modem, which was developed by the manufacturer
16%
30.11.2025
_config
03 bash#> vi sshd_config
04 AllowTcpForwarding no
05 ClientAliveCountMax 3
06 ClientAliveInterval 0
07 Compression delayed
08 LoginGraceTime 60s
09 LogLevel DEBUG3
10 MaxAuthTries 2 ... 3
16%
17.02.2015
:
15 collec.insert({"name":row[0],"observer":row[1],"type":row[2],"period":\
pfl(row[3]), "ecc":pfl(row[4]),"semaj_axs":pfl(row[5]), \
"perih_dist":pfl(row[6]), "incl":pfl(row[7
16%
20.06.2022
://get.k3s.io | sh -s - server --datastore-endpoint="mysql://rancher:secret@tcp(10.42.0.1:3306)/rancher"
Of course, the command specified here will only work if the system has direct access to the Internet
16%
10.06.2015
bulldozers digging up cables, Layer 2 or 3 software failures, or routers that fail one hop downstream on the provider's network.
To avoid hard disk failures, administrators have relied on RAID for a long time
16%
05.12.2014
of pkgsrc; releases 2014Q2 and 2014Q1 are fine):
imgadm install d34c301e-10c3-11e4-9b79-5f67ca448df0
To better understand, take a look at an article published in a previous issue of ADMIN
[5].
First, I
16%
14.03.2013
. Cryptographic hash functions had been ignored by researchers for too long.
In all, 64 proposals [3] were submitted for the competition, and these were subsequently reduced in several rounds to 15 and then 5 ... SHA-3 ... SHA-3 – The new hash standard
16%
10.06.2015
\
/etc/suricata/suricata.yaml -i eth0
Once Suricata has started, you can use the suricatasc command to verify that Suricata is working. Figure 3 shows how it is possible to verify the version simply
