15%
02.02.2021
FROM alpine:3.9
COPY --from=builder /endlessh /
EXPOSE 2222/tcp
ENTRYPOINT ["/endlessh"]
CMD ["-v"]
Assuming Docker is installed correctly (following the installation process for Ubuntu 20.04 in my
15%
17.09.2013
reset_counters 0 size_mb
0 ce_noinfo_count 0 csrow2 0 csrow5 0 device 0 sdram_scrub_rate 0 ue_count
0 csrow0 0 csrow3 0 csrow6 0 mc_name 0 seconds_since_reset 0 ue_noinfo_count
Notice that this system
15%
20.02.2012
.51, 0, 0.36, 17.74, 0.00, 6.38, 90, 0
2012-01-09 21:10:00, 92, 4.42, 0, 0.35, 20.81, 0.00, 7.22, 100, 0
2012-01-09 21
15%
11.02.2016
. Level 5 displays whether a file is changed; however, each processed file is listed in level 6:
# rdiff-backup -v5 /etc/ /mnt/backup
[...]
Incrementing mirror file /mnt/backup
Processing changed file X11
15%
25.09.2013
the code states should be good enough for caches up to 20MB. The Stream FAQ recommends you use a problem size such that each array is four times the sum of the caches (L1, L2, and L3). You can either change
15%
25.03.2020
] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdd1[5] sde1[4] sdc1[2] sdb1[1] nvme0n1p1[0](J)
20508171264 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [UU
15%
14.08.2017
:31 FS_scan.csv
$ gzip -9 FS_scan.csv
$ ls -lsah FS_scan.csv.gz
268K -rw-r--r-- 1 laytonjb laytonjb 261K 2014-06-09 20:31 FS_scan.csv.gz
The original file is 3.2MB, but after using gzip with the -9
15%
21.01.2020
RAID
$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sde1[4] sdd1[3] sdc1[2] sdb1[1] nvme0n1p1[0](J)
20508171264
15%
07.01.2013
plugin for Amazon Simple Storage Service (Amazon S3)
20 - sftp plugin for SSH File Transfer Protocol
21 - ebs plugin for Elastic Block Storage
22 - local plugin for Local file system
23
15%
31.10.2025
kernel
sles:~ # grep crash /proc/cmdline
root=/dev/disk/by-uuid/10a83ffe-5a9f-48a2-b8cb-551c2cc6b42d resume=/dev/sda3 splash=silent text showopts crashkernel=128
sles:~ # /etc/init.d/boot.kdump status
