18%
13.12.2018
Port=6817
16 SlurmdPort=6818
17 AuthType=auth/munge
18 StateSaveLocation=/var/spool/slurm/ctld
19 SlurmdSpoolDir=/var/spool/slurm/d
20 SwitchType=switch/none
21 MpiDefault=none
22 Slurmctld
18%
18.12.2013
FILE *ptr_myfile;
16
17 counter_limit = 100;
18
19 ptr_myfile=fopen("test.bin","wb");
20 if (!ptr_myfile)
21 {
22 printf("Unable to open file!");
23 return 1;
24 }
25 for ( counter=1; counter <= counter
18%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
18%
20.11.2013
. Therefore, if I’m going to back up my data to cloud storage, I want to make sure the data is encrypted. S3QL encrypts all data using a 256-bit AES key. An additional SHA-256 HMAC checksum protects the data
17%
12.11.2013
director
...
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
=====================================================
1 Full 135 6.679 M OK 18-Jul-13 16:00 BackupClient1
2 Incr 0 0 OK
17%
20.10.2020
Ryzen Threadripper CPU and can handle up to:
4 NVIDIA GPUs
256 GB Quad Channel DDR4 @ 3200 MHz
88 TB, 4 × M.2 PCIe Gen4 NVMe and 2.5′′ SATA drives
The Thelio Mega also includes 7 USB 3
17%
09.12.2021
-e package-list.txt
Enter passphrase:
Re-enter passphrase:
Output filename is: package-list.txt.lrz
package-list.txt - Compression Ratio: 2.537. Average Compression Speed: 0.000MB/s.
Total time: 00:00:05.11
Listing 11
17%
25.03.2020
, according to the README file, requires "half the memory, all in a binary less than 40MB" to run. By design, it is authored with a healthy degree of foresight by the people at Rancher [3]. The GitHub page [4
17%
25.03.2020
0 1048575 sr0
With the parted utility, you can create a single partition on each entire HDD:
$ for i in sdb sdc sdd sde; do sudo parted --script /dev/$i mklabel gpt mkpart primary 1MB 100
17%
09.01.2013
a 256-bit AES key. An additional SHA-256 HMAC checksum protects the data from manipulation.
Compression: S3QL compresses the data before storing, using either LZMA, bzip2, or gzip. This compression
