10%
25.03.2021
B/s (1444kB/s)(82.9MiB/60173msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=1410KiB/s (1444kB/s), 1410KiB/s-1410KiB/s (1444kB/s-1444kB/s), io=82.9MiB (86.9MB), run=60173-60173msec
10%
25.09.2023
: 55 ms.
Port: 80: op 2.1. 10.0.0.23 80 Time: 26 ms.
Port: 80: op 2.2. 10.0.0.23 80 Time: 56 ms.
Port: 80: op 3.1. 10.0.0.23 80 Time: 25 ms.
Port: 80: op 3.2. 10.0.0.23 80 Time: 48 ms.
Port: 80: op 4
10%
30.11.2025
path.
Figure 1: When Alice receives Bob's SIP socket with the Contact header in the 200 OK message, she can send the ACK (8) directly to Bob
10%
11.04.2016
of the desired distribution in RAW, TAR, or Docker format and then launch a container based on your choice of image. Listing 6 shows how to download a Fedora 22 image and launch a container based on it
10%
13.06.2016
, or Docker flavor and then start a container on the basis of that image. Listing 6 shows how to download a Fedora 22 image and start a new container based on it.
Listing 6
Download and Start
10%
12.09.2013
see that the base module is by far the largest, weighing in at more than 200KB.
When a module is loaded, it is copied to /etc/selinux/targeted/modules/active/modules/. When the system is rebooted
10%
12.05.2021
_age Always - 28 (Min/Max 22/28)
191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 35
193
10%
02.08.2021
- 28 (Min/Max 22/28)
191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 35
193
10%
17.01.2023
to NTP server (162.159.200.123) at stratum 4
time correct to within 21 ms
polling server every 64 s
Your output will not match this exactly, but you can see that it’s using an outside source to synchronize
10%
04.04.2023
the ntpstat utility on the head node and then running it:
$ sudo yum install ntpstat
$ ntpstat
synchronised to NTP server (162.159.200.123) at stratum 4
time correct to within 21 ms
polling server every
