14%
22.05.2023
-known/matrix/server
(in this case to https://domain.com/.well-known/matrix/server). Matrix expects an HTTP 200 response in JSON format. In this case, this response is also passed by the NGINX reverse proxy
14%
30.01.2024
picture emerges. The speed advantage of the ScaleFlux 3000 series compared with a setup without the special hardware is on average 50 percent greater for MySQL, and even up to 200 percent greater
14%
22.05.2023
the sequential read performance with the blockdev command. For example, to set a read-ahead value of 2048 (1MB) for the /dev/sdb1 device, use:
blockdev --setra 2048 /dev/sdb1
For kernel parameters, you can
14%
05.11.2013
the number of cores. On average, a card from the 5100 series only has 35MB of RAM for each thread, compared with several hundred megabytes for each thread on current server systems. Because of the limited
14%
03.09.2013
should not use legacy 10Mb technology, which is often encountered in the form of small switches that are still running, even if everything else has been modernized. Each hardware bottleneck leads to poor
14%
01.04.2014
bootstrapping of its own local cloud, which does not require access to a public cloud provider and thus imposes very few requirements.
The Cloudify tarball is a heavyweight at 160MB, but the user initially only
14%
21.01.2013
earlier.
As a client for the Admin Console, Red Hat recommends a Windows 7 system. This just leaves the mini-hypervisor, RHEV-H, for the virtualization host. This can be downloaded as a 172MB evaluation
14%
11.06.2013
available devices, including any LVM groups or RAID arrays.
In the example, Anaconda automatically creates the LVM group for the Fedora partition during the partitioning, and the same goes for the 500MB boot
14%
22.08.2011
systems is John the Ripper (John). John is a free tool from Openwall. System administrators should use John to perform internal password audits. It’s a small (<1MB) and simple-to-use password
14%
24.10.2011
, the CPU, the RAM (1,024MB), and the hard disk (320GB).
After investigating prices, the authors found that the hardware cost for an upgrade would be about half of the cost of a new machine. For large
