19%
11.05.2021
, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192]
A = single( rand(N,N) );
B = single( rand(N,N) );
start = clock();
C = A*B;
elapsedTime = etime(clock(), start);
gFlops = 2*N*N*N / (elapsedTime * 1e+9);
disp(sprintf("N = %4d
18%
30.11.2025
07 192.168.209.200:3260,1 iqn.1986-03.com.sun:02:8f4cd1fa-b81d-c42b-c008-a70649501262
08 # iscsiadm -m node
09 # /etc/init.d/open-iscsi restart
10 # fdisk -l
11 Disk /dev/sdb: 2147 MB, 2147418112 bytes
18%
07.01.2014
.
[laytonjb@home4 TEST]$ du -sh backup.0
14M backup.0
[laytonjb@home4 TEST]$ du -sh backup.1
12M backup.1
[laytonjb@home4 TEST]$ du -sh backup.2
9.2M backup.2
[laytonjb@home4 TEST]$ du -sh backup.3
7.7M backup
18%
25.03.2021
, ioengine=libaio, iodepth=32
fio-3.12
Starting 1 process
Jobs: 1 (f=1)
test: (groupid=0, jobs=1): err= 0: pid=5956: Sat Jan 9 16:38:53 2021
read: IOPS=256k, BW=998MiB/s (1047MB/s)(2045MiB/2049msec
18%
30.01.2020
: (groupid=0, jobs=1): err= 0: pid=7055: Sat Oct 12 19:09:53 2019
write: IOPS=34.8k, BW=136MiB/s (143MB/s)(9.97GiB/75084msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=136MiB/s (143MB
18%
09.12.2021
of threads, use:
$ plzip -v -9 -n 32 package-list.txt
package-list.txt: 2.640:1, 37.88% ratio, 62.12% saved, 11626 in, 4404 out.
The -n 32
option tells plzip
to use 32 threads to perform the compression
18%
25.09.2023
/ a-0001.a-msedge.net / a-0001.a-msedge.net on 80 is: Active. Continue.
Port: 80: op 1.1. a-0001.a-msedge.net [204.79.197.200] Time: 34 ms.
Port: 80: op 1.2. a-0001.a-msedge.net [204.79.197.200] Time
18%
25.03.2020
] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdd1[5] sde1[4] sdc1[2] sdb1[1] nvme0n1p1[0](J)
20508171264 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/3] [UU
18%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
18%
03.12.2015
shows how the host system forwards port 443 to the container:
sudo iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT --to-destination 10.0.3.190:443
The lxcbr0 interface is great for testing. If
