47%
25.03.2020
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 152e778212a62015 Linux 1 21.00 TB / 21.00 TB 4 KiB + 0 B 5.4.12-0
You are now able to read and write from and to /dev
47%
15.02.2012
of Total Elapsed Time = 0.003117 seconds
Average IO Time = 12.768351 seconds (0.378% of Total Time)
Standard Deviation of IO Time = 9.919384 seconds
Figure 1 below plots the total elpased time (yellow
47%
26.01.2012
of Total Elapsed Time = 0.003117 seconds
Average IO Time = 12.768351 seconds (0.378% of Total Time)
Standard Deviation of IO Time = 9.919384 seconds
Figure 1 below plots the total elpased time (yellow
47%
01.08.2012
: 288 M
Total download size: 4.4 M
Installed size: 297 M
Is this ok [y/N]: y
Downloading Packages:
(1/2): glibc-2.12-1.47.el6_2.9.i686.rpm
46%
30.11.2025
07 192.168.209.200:3260,1 iqn.1986-03.com.sun:02:8f4cd1fa-b81d-c42b-c008-a70649501262
08 # iscsiadm -m node
09 # /etc/init.d/open-iscsi restart
10 # fdisk -l
11 Disk /dev/sdb: 2147 MB, 2147418112 bytes
46%
25.03.2021
9 16:32:43 2021
Continue creating array? (y/n) y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Listing 17
Verify 2GB Details
$ sudo mdadm --detail /dev
46%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
46%
02.08.2021
SGEMM
for N = [2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192]
A = single( rand(N,N) );
B = single( rand(N,N) );
start = clock();
C = A*B;
elapsedTime = etime(clock(), start
46%
07.01.2014
/laytonjb/TEST/SOURCE/ backup.0/
[laytonjb@home4 TEST]$ ls -s
total 12
4 backup.0/ 4 backup.1/ 4 SOURCE/
[laytonjb@home4 TEST]$ du -sh
19M .
[laytonjb@home4 TEST]$ du -sh SOURCE/
9.2M SOURCE/
[laytonjb@home4 TEST]$ du -sh
46%
06.05.2024
).
Figure 4: LattePanda Mu (image credit: DFRobot).
The Intel N100 peaks around 22-23W under load, although DFRobot says up to 35W. The Raspberry Pi 5 under load peaks around 12W, so the power draw
