Search

: Scientific Linux 6.2 2.6.32-220.4.1.el6.x86_64 kernel GigaByte MAA78GM-US2H motherboard AMD Phenom II X4 920 CPU (four cores) 8GB of memory (DDR2-800) The OS and boot drive are on an IBM DTLA

just two nodes: test1, which is the master node, and n0001, which is the first compute node): [laytonjb@test1 ~]$ pdsh -w test1,n0001 uptime test1: 18:57:17 up 2:40, 5 users, load average: 0.00, 0.00

by the process 12m 12MB S Status of process R S = sleeping, R = running, Z = zombie %CPU Percent CPU being used by the process on a per-CPU basis

.  It is adjusted to terminal size, so each square = 10.00 MiB The PDF report may be more precise with each pixel=1MB Heatmap Key: Black (No I/O), white(Coldest),blue(Cold),cyan(Warm),green(Warmer),yellow(Very Warm),magenta(Hot),red(Hottest) Notice

---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1 152e778212a62015 Linux 1 21.00 TB / 21.00 TB 4 KiB + 0 B 5.4.12-0 You are now able to read and write from and to /dev

/laytonjb/TEST/SOURCE.full ./ Open-MPI-SC13-BOF.pdf PrintnFly_Denver_SC13.pdf easybuild_Python-BoF-SC12-lightning-talk.pdf sent 12.31M bytes received 72 bytes 24.61M bytes/sec total size is 12.31M speedup is 1.00 You can

buffered disk reads: 616 MB in 3.00 seconds = 205.03 MB/sec $ hdparm -T /dev/sda /dev/sda: Timing cached reads: 6292 MB in 2.00 seconds = 3153.09 MB/sec If this were a spinning disk, you would also

/s wMB/s avgrq-sz ... sdb 0.00 28.00 1.00 259.00 0.00 119.29 939.69 ... Parallelism Multiple computers can access enterprise storage, and multiple threads can access

             SN                   Model                                    Namespace Usage                      Format           FW Rev ---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1     152e778212a62015     Linux                                    1         21.00  TB /  21.00  TB     4 KiB +  0 B     5.4.12-0 You are now able to read and write from and to /dev/nvme0n1

was there. To test whether this worked, ssh to the node n0001 as root. [root@test1 ~]# ssh n0001 Last login: Sat May 26 12:00:06 2012 from 10.1.0.250 The /etc/hosts on the master node works fine