26%
27.08.2014
-1600)
CentOS 6.5 (updates current as of August 22, 2014)
For testing, I used a Samsung SSD 840 Series drive that has 120GB of raw capacity (unformatted) and is connected via a SATA 3 (6Gbps) connection
24%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
23%
21.08.2012
| 119 kB 00:00
(6/19): glib2-2.22.5-6.el6.i686.rpm | 1.1 MB 00:00
(7/19): libX11-1.3-2.el6.i686.rpm
23%
30.01.2020
=1): err= 0: pid=1634: Mon Oct 14 22:18:59 2019
write: IOPS=118k, BW=463MiB/s (485MB/s)(10.0GiB/22123msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=463MiB/s (485MB/s), 463Mi
23%
02.02.2021
of their toolkits.
For example, you can install and use Splunk Enterprise and its Machine Learning Toolkit (Figure 6) with a trial license for up to 60 days and index up to 500MB of data per day. The software
23%
21.08.2012
/primary_db | 4.6 MB 00:02
rpmforge | 1.9 kB 00:00
sl
23%
19.11.2019
volume "/dev/sdb" successfully created.
Then, I verify that the volumes have been appropriately labeled:
$ sudo pvs
PV VG Fmt Attr PSize PFree
/dev/nvme0n1 lvm2 --- <232.89g <232.89g
/dev/sdb lvm2 --- <6
23%
21.08.2012
.3.3-14.el6_3.x86_64.rpm | 2.2 MB 00:01
(3/4): php-common-5.3.3-14.el6_3.x86_64.rpm | 522 kB 00:00
(4/4): php-gd-5.3.3-14.el6_3.x86_64.rpm
23%
01.08.2012
| 4.3 MB 00:02
(2/2): nss-softokn-freebl-3.12.9-11.el6.i686.rpm | 115 kB 00
22%
16.10.2012
bytes:215392635 (215.3 MB) TX bytes:1759757 (1.7 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK
