18%
07.11.2023
the last command as an example, an option to specify the extent size would be:
# vgcreate -s 8M vg0 /dev/sdb1 /dev/sdd
The -s 8M
option specifies a PE size of 8MB when the VG is created. You can change
18%
28.03.2012
# Kernel: 2.6.32-220.4.1.el6.x86_64 Memory: 7540044 Swap:
# NumDisks: 2 DiskNames: sdb sda
# NumNets: 2 NetNames: lo: eth0:100
# NumSlabs: 201 Version: 2.1
# SCSI: DA:1:00:00:00 DA:2:00:00:00 CD:4
18%
05.09.2011
= kvmVM #specify the name
02 CPU = 1 # How many CPUs required?
03 MEMORY = 512 # RAM in MB
04 OS = [
05 KERNAL = "/boot/vmlinuz-2.6.32-24-generic", # Kernel to use
06
18%
15.06.2011
Front) serve as the baseline, with an index value of 100. More innovative services can achieve scores of more than 100, and less complete services will obviously score lower (Table 1). The index doesn't say much
18%
16.10.2012
bytes:215392635 (215.3 MB) TX bytes:1759757 (1.7 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK
18%
16.11.2020
goal will be limits of 100 image pulls per 6 hours for anonymous users and 200 for free accounts. Although that might sound like quite a large number (even for free accounts), given how complicated some
18%
17.03.2021
” on a single special motherboard. Each node was a Transmeta Efficeon processor connected to the other nodes over Gigabit Ethernet (GigE). Each node also had 512MB of memory, and the system had a 160GB hard drive
18%
05.02.2019
is to activate your application installation with the Apache enable site command. Also, you need to tweak your php.ini file to allow uploads larger than 6MB, which you'll need for SuiteCRM file uploads
18%
25.03.2020
billion IoT devices will be in action by the end of 2020.
For example, according to one report [1], a water project in China includes a whopping 100,000 IoT sensors to monitor three separate 1,000km
18%
15.04.2020
-1):
sol[0,j] = 10.0
sol[nx-1,j] = 1.0
# end for
for i in range(0,nx-1):
sol[i,0] = 0.0
sol[i,ny-1] = 0.0
# end for
# Iterate
start_time = perf_counter()
--> with pymp.Parallel(6
