16%
23.07.2012
your source IP address but not for nefarious use,
# nmap -S 3.3.3.3 12.34.56.78
then by port range, with no pings to avoid immediate detection and with operating system detection (-A):
# nmap -P0 -p1
16%
31.10.2025
, in case that triggers a firewall's ruleset:
# nmap -P0 12.34.56.78
Then, run the UDP and SYN (Stealth) scans concurrently, as mentioned previously:
# nmap -sUS 12.34.56.78
With the use of the -f
16%
25.03.2020
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 152e778212a62015 Linux 1 21.00 TB / 21.00 TB 4 KiB + 0 B 5.4.12-0
You are now able to read and write from and to /dev
16%
21.01.2020
SN Model Namespace Usage Format FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 152e778212a62015 Linux 1 21.00 TB / 21.00 TB 4 KiB + 0 B 5.4.12-0
You are now able to read and write from and to /dev/nvme0n1
16%
13.12.2018
disk reads: 1306 MB in 3.00 seconds = 434.77 MB/sec
federico@cybertron:~$ sudo hdparm -W /dev/sdb
/dev/sdb:
write-caching = 1 (on)
federico@cybertron:~$ sudo hdparm -W 0 /dev/sdb
/dev/sdb:
write
16%
21.08.2012
just two nodes: test1, which is the master node, and n0001, which is the first compute node):
[laytonjb@test1 ~]$ pdsh -w test1,n0001 uptime
test1: 18:57:17 up 2:40, 5 users, load average: 0.00, 0.00
16%
21.08.2014
} 'a'..'c';
12
13 $s .= $one;
14 $s .= $two;
15 $s .= $three;
16
17 my $temp;
18 for (my $i=0; $i<12288; $i++) {
19 $temp=substr($s,length($s)-1,1);
20 $s=$temp.$s;
21 $s = substr($s,0 ... 22
16%
30.11.2025
255 sec 63>
05 /pci@0,0/pci15ad,1976@10/sd@0,0
06 1. c8t1d0 S-1.0-10.00GB>
07 /pci@0,0/pci15ad,1976@10/sd@1,0
08 #
09 # zpool create mypool c8t1d0
10 # zpool status -v
11 pool ... 0
16%
02.10.2017
can bring your own build infrastructure or use ours.
When you install a snap for the first time, another small snap is also pulled down (at the time of writing, it’s around 85MB), known as the ... Canonical’s Snapcraft (Snappy) package manager creates self-contained applications that work across Linux distributions. We show you how to install, publish, and run a simple snap.
16%
07.01.2014
/laytonjb/TEST/SOURCE/ backup.0/
[laytonjb@home4 TEST]$ ls -s
total 12
4 backup.0/ 4 backup.1/ 4 SOURCE/
[laytonjb@home4 TEST]$ du -sh
19M .
[laytonjb@home4 TEST]$ du -sh SOURCE/
9.2M SOURCE/
[laytonjb@home4 TEST]$ du -sh
