10%
07.10.2014
, you should see the client config file ssh_config, which I'll get to a little later. If you've just installed the SSH server and want to be sure that it's listening, you can use the command
lsof -i :22
10%
16.10.2012
to the screen (STDOUT; line 15).
Listing 1: SSH Script
01 #!/usr/bin/php
02 22);
05 ssh2_auth_password($ssh, 'khess', 'password');
06 $stream = ssh2_exec
10%
25.03.2021
B/s (1444kB/s)(82.9MiB/60173msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=1410KiB/s (1444kB/s), 1410KiB/s-1410KiB/s (1444kB/s-1444kB/s), io=82.9MiB (86.9MB), run=60173-60173msec
10%
25.09.2023
: 55 ms.
Port: 80: op 2.1. 10.0.0.23 80 Time: 26 ms.
Port: 80: op 2.2. 10.0.0.23 80 Time: 56 ms.
Port: 80: op 3.1. 10.0.0.23 80 Time: 25 ms.
Port: 80: op 3.2. 10.0.0.23 80 Time: 48 ms.
Port: 80: op 4
10%
30.11.2025
path.
Figure 1: When Alice receives Bob's SIP socket with the Contact header in the 200 OK message, she can send the ACK (8) directly to Bob
10%
30.11.2025
240
240
Still unknown
Operating voltage (V)
2.5
1.8
1.5 (DDR3L: 1.35; DDR3U: 1.25)
1.2
Chip (I/O clock frequency, MHz)
DDR-200 (100)DDR-266
10%
12.09.2013
see that the base module is by far the largest, weighing in at more than 200KB.
When a module is loaded, it is copied to /etc/selinux/targeted/modules/active/modules/. When the system is rebooted
10%
12.05.2021
_age Always - 28 (Min/Max 22/28)
191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 35
193
10%
02.08.2021
- 28 (Min/Max 22/28)
191 G-Sense_Error_Rate 0x0032 100 100 --- Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 --- Old_age Always - 35
193
10%
17.01.2023
to NTP server (162.159.200.123) at stratum 4
time correct to within 21 ms
polling server every 64 s
Your output will not match this exactly, but you can see that it’s using an outside source to synchronize
