17%
09.04.2019
and is usually expressed as eights sets of four hexadecimal digits (known as nibbles, quibbles, or hextets) separated by colons. For example, an IPv6 address looks like this: 2001: 0db8: 1010: 61ab: f005: ba11: 00
17%
15.08.2016
to jump to the next table to manipulate packages for further processing.
The OpenFlow protocol comes in several editions. The current version is 1.5 (standard). Version 1.3 is still quite common, as is 1.0
17%
09.01.2013
are the following lines in /etc/libvirt/libvirtd.conf:
listen_tls = 0
listen_tcp = 1
auth_tcp = "none"
The configuration shown does not use any kind of authentication between cluster nodes, so you should exercise
17%
03.02.2022
the CVM and the hypervisor. The 192.168.5.0 network is used for this purpose.
The hypervisor always has the IP address 192.168.5.1 and the CVM the IP address 192.168.5.2, which means the installation
17%
15.04.2014
Magazine
, September 2010, issue 118, pg. 22
17%
08.08.2022
because, typically, head nodes or workstations open ports 22 (SSH), 443 (HTTPS), and sometimes 80 or 8080 (HTTP). Can I find terminal-sharing tools that use these ports? Moreover, can a web browser be used for terminal
17%
09.10.2017
if page.get('Contents') is not None:
21 for file in page.get('Contents'):
22 s3pump(file.get('Key'), bucket)
Data Highway?
For large S3 buckets with data in the multiterabyte
17%
20.03.2014
"Libguestfs" by Richard W.M. Jones, Linux Magazine
, September 2010, issue 118, pg. 22
New tool: virt-builder: http://rwmj.wordpress.com/2013/10/05/new-tool-virt-builder/
Virt-builder templates: http
17%
25.03.2020
, with 45 percent saying it will increase slightly and 32 percent stating it will increase significantly. Only 22 percent of respondents claimed open source adoption will remain the same and one percent
17%
16.06.2015
’s IP address. Roughly, it should look something like Listing 1. The IP address of the master node is 10.1.0.250. Be sure to check that the compute nodes can ping this address. Also be sure that ntp
