18%
30.11.2025
/init for event conditions that cannot be fulfilled – that is, the jobs would never start or stop of their own accord. These two commands were introduced in their current form in Upstart version 1.3, which in turn
18%
30.11.2025
[2] by VMware started to move into the server racks in the summer of 2011, but while I was researching this article, Citrix suddenly burst onto the scene with the XenServer 6.0 release [3
18%
30.11.2025
opcontrol --list-events
oprofile: available events for CPU type "Core 2"
See Intel Architecture Developer's Manual Volume 3B, Appendix A and Intel Architecture Optimization Reference Manual (730795-001)
INST
18%
31.10.2025
.019s
The process listing took about 3/100 of a second to execute in the real world and was allocated 5/1,000 of a second of CPU time in kernel mode (i.e., executing system calls) and about 2
18%
30.11.2025
is required in some cases – on openSUSE 11.3, you would issue the rclibvirtd start command, for example. After doing this, virsh version should output the version numbers of the components involved
18%
30.11.2025
authorities. CAcert [3] is a community-based alternative solution.
Finally, another option is to create self-signed certificates with OpenSSL. Listing 1 takes you through the steps required for this. If you
18%
30.11.2025
of the same language, so it needs to know which version your application uses. An ugly situation could arise, for example, if the server used Python 2 but the program was written in Python 3. A single command
18%
30.11.2025
console is the management interface that supports administration via the vSphere client (or VI client in ESX3.x).
VMkernel Port: The ESX server uses a VMkernel port to access, for example, IP storage (i
18%
30.11.2025
=(ALL) ALL
replace sudo with admin and quit the chroot environment with exit.
Before you can test the container you prepared, you need to configure /lxc/conf.guest in LXC by adding the content from Listing 3
18%
30.11.2025
magazine [3].
In other words, the many Cobbler system records are really the biggest problem. Just to jog your memory: Using system records, Cobbler can create an individual PXE configuration file for each
