20%
30.11.2025
example, Mar 25, 2011, PrivateKeyEntry,
33 Certificate fingerprint (MD5): AC:D5:CB:5C:13:9D:EF:F2:85:6B:AB:89:49:F8:48:3A
Finally, to enable the web connector's HTTPS port, you need to add
20%
03.08.2023
in 2014. At the time of writing, the available Kea versions were 2.2.0 (July 2022, Current-Stable) and 2.3.6 (March 2023, Experimental-Development). Most distributions have prebuilt Kea packages
20%
05.08.2024
, as in Python [3] or Node [4].
Recent books have been published about writing shell commands in Rust [5], Python [6], Node.js [7], and even Go [8], and it is into this last language's interesting performance
20%
30.11.2020
cri-o-${CRIO_VERSION}
The following NEW packages will be installed
cri-o-1.17
0 to upgrade, 1 to newly install, 0 to remove and 0 not to upgrade.
Need to get 17.3 MB of archives.
After this operation
20%
18.02.2018
. The required modifications are explained in the Huginn wiki [3].
The software is based on Ruby on Rails [4] and therefore requires an installed Ruby environment; in fact, it needs version 2.2 or 2.3
20%
10.07.2017
with the original Raspberry Pi Model A, ranging from two to more than 250 nodes. That early 32-bit system had a single core running at 700MHz with 256MB of memory. You can build a cluster of five RPi3 nodes with 20
20%
20.10.2013
Modern drives use S.M.A.R.T. (self-monitoring, analysis, and reporting technology) to gather information and run self-tests. Smartmontools is a Linux tool for interacting with the S.M.A ... of the drives (more on that later).
Smartmontools is compatible with all S.M.A.R.T. features and supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. It also supports the major Linux RAID cards ...
Modern drives use S.M.A.R.T. (self-monitoring, analysis, and reporting technology) to gather information and run self-tests. Smartmontools is a Linux tool for interacting with the S.M.A ... S.M.A.R.T., Smartmontools, and Drive Monitoring
20%
30.11.2025
: 1487680 0 IO-APIC-fasteoi uhci_hcd:usb3
14 22: 22998855 0 IO-APIC-fasteoi psb@pci:0000:00:02.0
15 23: 3084145 0 IO-APIC-fasteoi hda_intel
16 24: 1 0
20%
11.09.2018
.
Figure 6: Good old ``get pods'' but with width: ``kubectl get pod nginx-dep-54b9c79874-b9dzh -o wide'' showing an internal pod IP Address in the 172.17.0.0 range.
Use the -n
option to specify
20%
10.11.2021
less compression but faster compression times and the default compression level being 3
. You can use compression levels 20
to 22
with an additional option. For even faster compression
