48%
18.07.2013
buffered disk reads: 616 MB in
3.00 seconds = 205.03 MB/sec
$ hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 6292 MB in
2.00 seconds = 3153.09 MB/sec
If this were a spinning disk, you would also
48%
23.07.2012
.13.134.52):
Not shown: 994 filtered ports
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 4.3 (protocol 2.0)
25/tcp closed smtp
53/tcp open domain ISC BIND 9.3
48%
24.02.2022
.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000 (Ethernet)
RX packets 11919 bytes 61663030 (58.8 Mi
48%
30.07.2014
00:00:00 Thursday January 1, 1970, Coordinated Universal Time (UTC).
Listing 1: Perl Example Client
#!/usr/bin/perl
use strict;
use warnings;
use IO::Socket;
use Sys::CpuLoad;
my
48%
05.11.2018
nodes, and make sure to do this as a user and not as root.
3. To make life easier, use shared storage between the controller and the compute nodes.
4. Make sure the UIDs and GIDs are consistent
48%
13.12.2018
In previous articles, I examined some fundamental tools for HPC systems, including pdsh [1] (parallel shells), Lmod environment modules [2], and shared storage with NFS and SSHFS [3]. One remaining
47%
07.04.2022
,BROADCAST,RUNNING,MULTICAST> mtu 1460
inet 10.0.0.2 netmask 255.255.255.255 broadcast 0.0.0.0
inet6 fe80::bfd3:1a4b:f76b:872a prefixlen 64 scopeid 0x20
ether 42:01:0a:80:00:02 txqueuelen 1000
47%
20.05.2014
, from, or through the system is possible, not even loopback traffic (Figure 3). But, because loopback should always be allowed, you add a loopback rule
47%
16.10.2012
to the screen (STDOUT; line 15).
Listing 1: SSH Script
01 #!/usr/bin/php
02 22);
05 ssh2_auth_password($ssh, 'khess', 'password');
06 $stream = ssh2_exec
47%
04.12.2024
Shift or – as shown here – an Ingress route for accessing the AWX service.
This strategy also works with MicroK8s or K3s. You might have to adjust the Ingress definition if routers such as Traefik cannot cope
