17%
07.01.2014
/laytonjb/TEST/SOURCE/ backup.0/
[laytonjb@home4 TEST]$ ls -s
total 12
4 backup.0/ 4 backup.1/ 4 SOURCE/
[laytonjb@home4 TEST]$ du -sh
19M .
[laytonjb@home4 TEST]$ du -sh SOURCE/
9.2M SOURCE/
[laytonjb@home4 TEST]$ du -sh
17%
10.06.2015
to the first sed I know that here is only a SINGLE space
45 display_list="$(sed ':a;N;$!ba;s/\n / /g'<<<"$xrandr_current" | sed \
-n -e 's/^\([a-zA-Z0-9_-]\+\) connected.* \([0-9]\+\)mm.* \([0-9]\+\)mm
17%
25.03.2021
9 16:32:43 2021
Continue creating array? (y/n) y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md0 started.
Listing 17
Verify 2GB Details
$ sudo mdadm --detail /dev
17%
30.01.2020
: (groupid=0, jobs=1): err= 0: pid=7055: Sat Oct 12 19:09:53 2019
write: IOPS=34.8k, BW=136MiB/s (143MB/s)(9.97GiB/75084msec); 0 zone resets
[ ... ]
Run status group 0 (all jobs):
WRITE: bw=136MiB/s (143MB
17%
09.12.2021
of threads, use:
$ plzip -v -9 -n 32 package-list.txt
package-list.txt: 2.640:1, 37.88% ratio, 62.12% saved, 11626 in, 4404 out.
The -n 32
option tells plzip
to use 32 threads to perform the compression
17%
25.09.2023
/ a-0001.a-msedge.net / a-0001.a-msedge.net on 80 is: Active. Continue.
Port: 80: op 1.1. a-0001.a-msedge.net [204.79.197.200] Time: 34 ms.
Port: 80: op 1.2. a-0001.a-msedge.net [204.79.197.200] Time
17%
30.11.2025
07 192.168.209.200:3260,1 iqn.1986-03.com.sun:02:8f4cd1fa-b81d-c42b-c008-a70649501262
08 # iscsiadm -m node
09 # /etc/init.d/open-iscsi restart
10 # fdisk -l
11 Disk /dev/sdb: 2147 MB, 2147418112 bytes
17%
18.07.2013
: XXXXXXXXXXXXXXXXXX
6 Firmware Revision: 2CV102HD
7 Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
8 Standards:
9 Used: ATA/ATAPI-7 T13 1532
17%
03.02.2022
the external 12V power supply provided and the USB interface for serial access.
Table 1
ESPRESSObin Technical Specs
SOC
Marvell Armada 3700LP (88F3720) ARM Cortex A53 processor
17%
02.08.2021
SGEMM
for N = [2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192]
A = single( rand(N,N) );
B = single( rand(N,N) );
start = clock();
C = A*B;
elapsedTime = etime(clock(), start
